Results 1 to 14 of 14

Thread: old style interior linings, anyone ever changed one ?

  1. #1
    Join Date
    Apr 2017
    Location
    Rock of Gibraltar
    Posts
    24
    My Unit
    Romahome 2 berth pod on a Daihatsu Hijet
    Thanks
    40
    Thanked 18 Times in 11 Posts

    Default old style interior linings, anyone ever changed one ?

    Hi all, I have an old Romahome, same set up as Kernowjon, but a bit less tidy, anyway the interior lining has seen better days, it is shedding hair and fibres like a Wookie in a heatwave! Has anyone every stripped this lining out and replaced it with something less asthma inducing?

    Am I right in thinking it is held in place with screws that locate into blobs of resin on the inner skin?

    Any photos, advice, suggestions gratefully received.

    Cheers, Graham

  2. #2
    Join Date
    Jan 2017
    Location
    west Cornwall
    Posts
    412
    My Unit
    Romahome pod on Daihatsu Hi-Jet 1300
    Thanks
    328
    Thanked 440 Times in 233 Posts

    Default

    Graham

    Are you talking about the ceiling lining?

    I think IP / Romahome used many different linings. My ceiling is a sort of fabric on board - the board stuck to big blobs of resin.

    When the weather changes 24 hours no rain (Not a problem for you) we are going to undo the rooflights - we have also taken down the pelmets (widening them to create a 4 inch wide shelf to get extra storage) - take down the ceiling - new glue . Make some pros to hold up the ceiling in the centre and both sides. ew glue "NO Nails" or similar to refasten to the resin blobs.

    Maybe you could fabricate new lining panels from very thin 3mm plywood - either go overboard and use Marine Ply or WSP exterior grade - use the old panels for templates.

    Jon

  3. The Following User Says Thank You to kernowjon For This Useful Post:


  4. #3
    Join Date
    Sep 2007
    Location
    South Cheshire, nr Congleton
    Posts
    10,345
    My Unit
    Double Dutch Kip Caravan
    Thanks
    11,973
    Thanked 3,521 Times in 2,128 Posts

    Default

    Here's a thread that Pamsicle wrote, which may be of some help. Pam recovered the inside of her Romini caravan (same thing, only towable) for the same reason.

    http://www.smallmotorhome.co.uk/foru...-Romini-refurb

  5. The Following 3 Users Say Thank You to jayjay For This Useful Post:


  6. #4
    Join Date
    Apr 2017
    Location
    Rock of Gibraltar
    Posts
    24
    My Unit
    Romahome 2 berth pod on a Daihatsu Hijet
    Thanks
    40
    Thanked 18 Times in 11 Posts

    Default

    Thanks guys, had the skylight cover down and yes, fir coat glued to thin ply with an air gap, lots of screws holding it up so very likely lots of resin blobs, I wonder what else I'll find under thee ��

  7. The Following 2 Users Say Thank You to Tigerfish For This Useful Post:


  8. #5
    Join Date
    Apr 2017
    Location
    Rock of Gibraltar
    Posts
    24
    My Unit
    Romahome 2 berth pod on a Daihatsu Hijet
    Thanks
    40
    Thanked 18 Times in 11 Posts

    Default

    Jayjay, thanks for the link to Pamsicle's thread, very very helpful, we are going to try an altogether different covering for our refurb but the basic principles of the fit will be pretty much along the same lines.

    I'll add pictures as we go

    Thanks, Graham.

  9. The Following User Says Thank You to Tigerfish For This Useful Post:


  10. #6
    Join Date
    Sep 2010
    Location
    Between Dover & Deal, in Kent
    Posts
    881
    My Unit
    Demountable on 2003 Suzuki Carry
    Thanks
    7
    Thanked 331 Times in 202 Posts

    Default

    We used the lining sold on ebay for campers to cover the window end and tops and bottoms of our seating area using spray adhesive (so its only the kitchen end with bare walls)

    P1020800.jpg


    We also used this to complexly re-furb a pod on both the ceiling (put up first by two people) and walls .

    Heathrow Camper 4.jpg

    P1000224.jpg

  11. The Following 5 Users Say Thank You to Donk's Dad For This Useful Post:


  12. #7
    Join Date
    Jan 2017
    Location
    west Cornwall
    Posts
    412
    My Unit
    Romahome pod on Daihatsu Hi-Jet 1300
    Thanks
    328
    Thanked 440 Times in 233 Posts

    Default

    Hi Graham
    We seem to be in tandem. I took the ceiling down to reglue - 30+ year old ply needs replacing - so we too are now looking at resin "BLOBS"
    Tomorrow we will go and get a sheet of ply - first question 3mm or 5mm
    We have decided to do the job properly - we wont get away before late June or early July.
    I have ordered some vehicle trim carpet for the ceiling and sides.
    Rooflight seals have shrunk and hardened so they are like biscuit or old dog chews. Obviously we will have to reseal the window rubbers too.

    Jon

  13. The Following User Says Thank You to kernowjon For This Useful Post:


  14. #8
    Join Date
    Sep 2010
    Location
    Between Dover & Deal, in Kent
    Posts
    881
    My Unit
    Demountable on 2003 Suzuki Carry
    Thanks
    7
    Thanked 331 Times in 202 Posts

    Default

    Luckily the ceiling panels on the pod i refurbished were fine and just needed recovering.

    I would suggest using 3mm panels. Less weight and a bit more flexible.

    Easier to fit as two that struggle to get a full sheet in

  15. The Following User Says Thank You to Donk's Dad For This Useful Post:


  16. #9
    Join Date
    Jan 2017
    Location
    west Cornwall
    Posts
    412
    My Unit
    Romahome pod on Daihatsu Hi-Jet 1300
    Thanks
    328
    Thanked 440 Times in 233 Posts

    Default

    Thanks for that The ceiling we took down was in 2 halves - divided down the centre - I was intending to do the same. I will use the 3mm - I need some fine teeth saw blades for the jig-saw as 3 mm has a tendency to splinter.
    Jon

  17. The Following User Says Thank You to kernowjon For This Useful Post:


  18. #10
    Join Date
    Sep 2010
    Location
    Between Dover & Deal, in Kent
    Posts
    881
    My Unit
    Demountable on 2003 Suzuki Carry
    Thanks
    7
    Thanked 331 Times in 202 Posts

    Default

    3mm can be cut using a stanley knife.

    use a new blade and make several passes (usually takes about 3) going a bit deeper each time

    that wiil give a smoother edge with no splintering

  19. The Following User Says Thank You to Donk's Dad For This Useful Post:


  20. #11
    Join Date
    Jan 2017
    Location
    west Cornwall
    Posts
    412
    My Unit
    Romahome pod on Daihatsu Hi-Jet 1300
    Thanks
    328
    Thanked 440 Times in 233 Posts

    Default

    I am risking 6mm as a sheet of surplus marine ply fell into my hands for a tenner.
    I asked no questions but the bloke works in a boat yard - he said "Oh Ive got some thin ply."
    All cut and we are starting later today.
    Jon

  21. The Following 2 Users Say Thank You to kernowjon For This Useful Post:


  22. #12
    Join Date
    Jan 2017
    Location
    west Cornwall
    Posts
    412
    My Unit
    Romahome pod on Daihatsu Hi-Jet 1300
    Thanks
    328
    Thanked 440 Times in 233 Posts

    Default

    Graham

    How is the relining progressing?

    Jon

  23. The Following User Says Thank You to kernowjon For This Useful Post:


  24. #13
    Join Date
    Apr 2017
    Location
    Rock of Gibraltar
    Posts
    24
    My Unit
    Romahome 2 berth pod on a Daihatsu Hijet
    Thanks
    40
    Thanked 18 Times in 11 Posts

    Default

    Quote Originally Posted by kernowjon View Post
    Graham

    How is the relining progressing?

    Jon
    Hi John, we managed to salvage the original panels and Rose has recovered them with some thin carpet from the Spanish equivalent of B&Q, used a liberal amount of adhesive over the whole thing and just need to make up some struts and pads to hold it all up, I have no intention of standing in a hot pod with my arms raised for at least 30 mins waiting for it all to set.

    Of course I'm still also wading through the nightmare that are the electrics in our pod, having ripped out all the old cables in the gas bottle hold I no longer have any feeds for the ceiling lights or other auxiliaries, except for a couple of wires where the light fittings used to be, cant figure out where the original cable runs were so I'm probably going to re-instal from scratch.

    The electrics have thrown up another problem, the rear light clusters are original fit, as is the wiring and connectors, everything seems to be shorting across after god knows how many years of use and I don't hold out too much hope at the moment of being able to refurbish them, at least not immediately, so I might end up getting a set of replacement clusters just to get the thing legal again.
    My 'to do' list is rapidly expanding

    On the plus side Rose has finally found some fabric she likes to recover the seats & 'backrests'.

  25. #14
    Join Date
    Jan 2017
    Location
    west Cornwall
    Posts
    412
    My Unit
    Romahome pod on Daihatsu Hi-Jet 1300
    Thanks
    328
    Thanked 440 Times in 233 Posts

    Default

    Graham,

    I'll start with the vehicle lights. I assume for a moment the feed in is from a 12N trailer socket that is a 7 pin plug feeding into the van. The plug and socket will be under the van at the rear of the pickup where a towbar would be.

    http://www.towingandtrailers.co.uk/shop/132/133/142/

    My solution would be a total rewire. Get 5 metres of 7 core trailer wire and wire in using the wiring diagram the link took you to. If you have read either my posts or Donk's Dad's posts you will see we have both replaced the original light units with LED lights. No more changing light bulbs. If you do go LED you will also need a dummy load across each indicator unit. Your other alternative are ordinary trailer lights.

    I ran all my light wires in at the front end of the drop section along the side and up to the righthand rear lights. Here I did a junction with those wires going to LH lights - I ran this wire across tight to the door step and to the LH lights.

    If you are going to LEDs I found a lovely little gizmo - number plate bolts with a built in LED - no number plate light unit as such.
    http://www.ebay.co.uk/itm/TWO-LED-NU...8AAOxy3cJTgcpI
    Light units
    http://www.ebay.co.uk/itm/2x-10-LED-...item440169b434
    Indicator load
    http://www.ebay.co.uk/itm/4x-LED-Ind.../162337522305?
    You only need 2 of the 4 loads unless you change the front indicator bulb for an LED.

    I hope this bit helps.
    Jon

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


We use cookies to make this site as useful as possible. They are small text files placed in your browser to track usage of our site but they donít tell us who you are.

By continuing to use this site you are consenting to cookies being placed on your computer. Find out more here: Cookies in Use